TOPlus mini / TOPlus premium pull-back
Removal
96
Order h49 7144.907-333
INFORMATION
To be able to remove the changing part, it may be nec-
essary to remove the clamping element first.
1. As described in the »Preparing the machine for re-
moval« chapter, prepare for the following steps.
2. Move the clamping device into release position.
10.3.1 Removal of the variant with direct screw connection
1. Unscrew the changing part from the product using its
thread.
10.3.2 Removal of the variant x-times with axial screw connection
1. Unfasten and remove the fixing screws on the changing
part.
