MANOK plus
Layout and function
26
Order h49 7144.907-333
4 Layout and function
4.1 Overview and brief description
1
Clamping head [clamping
element]
2
Coupling
3
Base end-stop
4
Clamping device
The clamping device is a hand-actuated stationary chuck.
The clamping device is designed as an end-stop chuck.
The clamping device is screwed to the machine table.
It is operated with the help of an actuating key.
The clamping element was installed in the clamping device
with an appropriate changing fixture and it clamps the work-
piece being machined.
The workpiece end-stop can be screwed to the base end-
stop, screwed on directly, or fitted as a front-mounted end-
stop.
The clamping device functions on the pull-back principle.
When clamping, the clamping element performs an axial
movement towards the workpiece end-stop.
The mobile coupling draws the clamping element into the
stationary taper.
This draws the workpiece firmly up against the stationary
workpiece end-stop.
This increases the rigid strength of this clamping configura-
tion.
