Quick change-over system centroteX S
Technical data
Order h49 7144.907-333
21
The achievable actuation forces may vary as a result of the
maintenance status [lubrication status and level of contami-
nation] of the product [see »Maintenance schedule« chap-
ter].
3.3 Balancing quality
The product is balanced before leaving the factory [balanc-
ing quality - see »General information« chapter].
DANGER
Serious injuries caused by parts being ejected
centrifugally if products are not balanced cor-
rectly!
Never remove balancing screws and weights at-
tached to the product.
NOTE
Material damage caused by machining with incor-
rectly balanced products!
Never remove balancing screws and weights at-
tached to the product.
3.4 Speed
The product is authorized for rotational operation.
The maximum speed is written on the product [maximum
speed, see »General information« chapter].
DANGER
Serious injuries caused by parts being ejected
centrifugally due to a non-compliant combination
of several products!
From all of the maximum speeds indicated for the
combined products, always remain at the lowest
of those maximum speeds.
3.5 Operating conditions
Indication
Value
Unit
Ambient temperature range
15 - 65
°C
Workpiece temperature
≤ 80
°C
Humidity
≤ 80
%
Table 2:
Operating conditions
3.6 Type designation
The type designation is on the product and it includes the
following indications:
Manufacturer
