B-Top
Layout and function
Order h49 7144.907-333
27
4.2 Accessories required
4.2.1 Spindle flange
The spindle flange helps to adapt the clamping device to suit
the machine tool.
Depending on the scope of delivery, the spindle flange can
either be supplied with the unit or provided by the customer.
4.2.2 Drawtube adapter
The drawtube adapter serves as a connector between the
drawtube on the machine tool and the clamping device and,
depending on the type of machine, can be configured in var-
ious forms.
4.2.3 Chuck jaws
The jaw chuck can be equipped with the following variety of
jaws:
Base jaws
Top jaws [soft, hard, aluminum]
Claw jaws [hard]
Stepped block jaws [hard]
4.3 Optional accessories
The following optional accessories are available for different
sizes of product.
4.3.1 Integrated liner
The integrated liner, which can be replaced from the front,
enables workpieces to be adapted:
Closed
With ejector
With capacity
With spray nozzles
With adjustable end-stop
4.4 Special aids
4.4.1 Release key
The release key is used for installation and removal of the
chuck jaws.
4.4.2 Assembly key
The assembly wrench [included in the scope of delivery if
required] is used to install and remove the product on the
machine tool.
