Operation
96
TOPlift L+ edition • Operating instructions • Betriebsanleitung
Fig. 116: Safety switch-off and travel
limiter on the top
16.8.2
Switching flap on the top
Fig. 117: Switch-off plate on the top
1
Switch-off plate on the top
The switch-off plate (1) above the service lift serves as a safety switch-off.
If the plate is turned upwards or pushed downwards by a collision with an
obstacle on the ladder, the service lift stops and will no longer run.
The switching flap is used as an emergency exit upwards from the service lift.
Display symbol on the optional display:
16.8.3
Switch plate on the bottom
Fig. 118: Switch-off plate on the bottom
1
Switch-off plate on the bottom
The switch-off plate (1) under the service lift serves as a safety switch-off.
If, for example, the plate is pushed upwards by a collision with an obstacle, the
service lift will stop and will not be able to descend further.
NOTICE
To make the service lift ready for operation again after the switch-off plate has
been actuated, the switch-off plate must be aligned evenly on all four
suspensions.
Display symbol on the optional display:
16.8.4
Slide in switch-off plate on the bottom
Fig. 119: Slide in switch-off plate
1
Slide in switch-off plate on the bottom
The service lift can be opened downwards with a slide (1) in the switch plate.
When the slide is open, the service lift stops and can no longer be moved.
The slide serves as an emergency exit from the service lift downwards.
Display symbol on the optional display:
16.8.5
Collision protection on climbing side (optional)
Fig. 120: Climbing-side collision
protection
If the fixed access ladder climbing path is on the opposite side of the lift travel
path, the service lift is equipped with collision protection.
If the safety switch-off of the collision protection is tripped, for instance through
collision with an obstacle on the access ladder, the service lift stops and cannot
descend further.
