Haier XQS52-78 User Manual Download Page 1

The ventilation
holes at thebottom

Before Using 

Before Using 

Safety precautions

In case  the washing  machine  is  installed on ground 
with carpet, be careful not to block the ventilation hole
with carpet.

Do not put the machine at damp place like the 
bathroom. Never  wash  it with  water.  Do not 
put wet laundries on the control panel coating

.

Do not let the machine share one receptacle with other
electric appliances. If the power  plug  is  damaged,  or 
the  plugging  into  the receptacle is loose,  do not use
the plug any more.

Do not  wash  water-proof  laundry  like  the raincoat, 
bikecovers,  down  textiles  etc.  To  avoid  abnormal 
vibrations in spinning and damages to the laundries.

Do not  bend, stretch,  twist,  bind  the  power  cord  by  force, or  reformit. 
Do not press or clamp it  with heavy  items.  If  the power  cord and  power
plug are bad, or the  receptacle  is loose, be  sure  to have  it  replaced  by
the technicians of our special shop or our agent,or the after-sales service
department  to avoid any risk.Keep  the prong of  the power plug clean.If
dust is found on the power plug, please wipe it off with dry cloth.

In  normal usage of  the washing  machine, the power
plug shall be ready to be pulled or plugged with hang.
Be sure to pull the plug off  and close the water faucet
when occurring power failure,delivering the maching,
setting the  machine idle or cleaning  the  machine,Do 
not plug or pull the power plug with wet hand.

earth

Do not use water with temperature higher than 50

Please plug the plug on special 220V AC receptacle.
Be sure to use three phase power receptacle.Ensure
the earthing prong of the power redeptacle is earth-
ed reliably.Use leakage protector if possible.

Soft object

Summary of Contents for XQS52-78


















Reviews: