background image

Operational functions

G. DELAY

Setting the finished time of the scheduled washing by touching this button. The defaulted
time for the scheduled washing is 9 hour. The washing time can be increased one hour by
one touching of the button. If the button is pressed and held the time can be varied from 1
to 24 hour cyclically till the button is released. If the START/PAUSE button is pressed the
current setting is confirmed after the scheduled washing program is ready.
If the time for the washing program is longer than the time of the scheduled washing then
the program will work immediately after the START button is pressed.
Attention: There are some different between the setting time and actual time because of
the water temperature, water pressure and the distributions of the laundry in the tube.
There is no scheduled washing function for "Delicate" program.

H. Remaining time: Min ( Digital display screen )

This display unit is used for warning the washing time left and fault information. It can
display the setting time of scheduled washing and heating temperature. The screen only
display the hour if the time setting is over 10 hour.

I. TEMP ( Children lock )

J. PREWASH

The prewash function can be added into the washing program.

K. WATER LEVEL

The related time and water level in the drum can be selected by pressing this button in
accord to the laundry quantity. The more bright the indicate light the more high the water
level in the drum and the default washing time is longer with this height. The quantity
indicator changes its position accordingly each time the laundry quantity button is pressed.
We suggest using the first gear when the quantity is less than 1 Kg. And using the second
gear when the quantity is less than 2.5 Kg. And using the last gear when the quantity more
than 2.5 Kg. All other program setting indicate the default values when the laundry quantity
is set. For each setting range please see the program setting for reference. The default
program will be carried out if the function is not selected.

L. Door lock indicator

This lamp is light when the door is locked and the machine is in the operation state and the
door can not be opened. If the condition for opening the door is met, press the START
/PAUSE button this lamp is off and the door is unlocked and the door can be opened.

M. START/PAUSE

The set program is carried out while this button is pressed. To pause the current program,
just press this button and the program will not operate at the moment. Pressing this button
again if you want to resume the operation. The program can not be reset in the process of
running or pause state. Turning off the power and turning on it again if you want to reset
programs.

Preparations

Power supply

Plug in the power supply
220V/50Hz

Water supply

Turn on the tap ensure that the
water is clear.
Caution: Before starting the
washing machine turn on the
water faucet to ensure that the
water faucet and the water inlet
hose are connected correctly and do not leak.

Laundry treatment

Detergent selection

The washing result depends on the
quality of the detergent except the
function performances of the washing
machine. There are many brands of
detergent in the market. For the best
washing result, we suggest you using
the special on-form detergent that
produced for the auto drum washing
machines.
For washing the wool and the chemi-
cal fibre please use the special deter-
gent for those materials. Do not use
dry-clean dissolvent.
Attention: Only put the quantity of the
detergent in the cartridge for one time.

Sort out clothes according to type and extent
of dirt. There are three types of clothes:cotton,
synthetical and woolen ( silk ) fabrics.

Separeate white clothes from colored. If whites
and coloreds are combined for one load, make
sure the coloreds are coloreds are colorfast.

- Remove all objects from pockets that may cause
damage to the machine, such as keys and coins.

- Clothing with frayed edges or yarns should be
put in a wash bag or special bag before washing.

- Repaier damaged clothing, lose buttons or
damaged zips and hooks efore washing.

- Bed sheet and table ware should be loosely
loaded and not folded.

This washing machine is for household use and
designed for mechanically washable clothes.
When washing, separate unwashable clothes
with reference to clothes labels.

Wash load

Type

Max load

Non-fade
cottons

Delicat fabrics

Woolen fabrics

Blending fabrics

5kg

2kg

1kg

2.5kg

7

10

Touch this button to set washing temperature. The temperature is changed cyclically each
time the button is pressed. For the highest temperature setting of each program, please see
the program setting guide. The "Delicate" program there is no temperature setting function.
To lock button on the control panel by pressing this button for 3 second, which including
the POWER button. These can be unlocked if thise button is pressed for another 3 second.

Summary of Contents for XQG50-S1216











Reviews: