background image

CONTROL AND DISPLAY SYSTEM

7XUQRQRUWXUQRIIWKHFKLOOFROGVWRUDJHIXQFWLRQ

When pressing chill-cold storage adjustment Button J and  chill-cold storage adjustment
 Button K at the same time for three seconds, the chill-cold storage sign I will be out after the
 first sound of the buzzer an the chill-cold storage function is turn off; when pressing chill-cold 
storage adjustment Button J and  chill-cold storage adjustment Button K at the same time for 
three seconds again, the chill-cold storage sign I will be on after the first sound of the buzzer
 and the chill-cold storage function is turn on again.

&HOVLXV)DKUHQKHLWVZLWFKLQJIXQFWLRQ

Press Button F and Button G and Button J on the vision board at the same time for three 
seconds, the Celsius will be used after the first sound of the buzzer; Press Button F and Button
 G and Button J on the vision board at the same time for three seconds again, the Fahrenheit 
will be used after the first sound of the buzzer. 

7KHLQGLFDWHGPHDQLQJRIWKHZDWHUILOWHU

J

K

F G

J

(Only apply for the models with the function of taking out cold drinks)

M     N

When the indicating light of the water filter is lighted, it means the water filter should be changed. 
And after the water filter is changed, please press the water filter reset button M, and the
 indicating light of the water filter N is out.

Summary of Contents for PBFS21EDAW





































Reviews: