Haier HWS236GDGU1, User Manual

Page: 19 / 376

6. Fine tuning of the door
The appliance closes more easily if the levelling feet on
the front are used:
Rotate the adjustable feet (Fig. 8) to turn them up or
down:
▶
Turning the feet clockwise raises the appliance.
▶
Turning the feet counterclockwise lower the appli-
ance.
WARNING!
To avoid risks a damaged power cord must be replaced by the customer service (see
warranty card).
WARNING!
▶
The appliance is heavy. You need two persons to carry out the door reversibility.
▶
▶
Do not tilt the appliance more than 45 ° to prevent damage of the cooling system.
8. Electrical connection
Before each connection check if:
▶
power supply, socket and fusing are appropriate to the rating plate.
▶
the power socket is earthed and no multi-plug or extension.
▶
Connect the plug to a properly installed household socket.
7. Waiting time
The maintenance-free lubrication oil is located
capsule of the compressor. This oil can get
the closed pipe system during transport if the
ance is tilted. Before connecting the applianc
power supply, wait 0.5 hours (Fig. 9) so that the
in the
through
appli-
e to the
oil runs
back into the capsule.
9. Door Reversibility
Before connecting the appliance to the power supply you should check, whether the door
swing must changed from right (as delivered) to left, if this is required by the installation
location and the usability
8
0.5 h
9
EN
Installation
17