Washing sequence
8
（
Not set the switch to
DRAIN during washing
）
Wash timer
(To set to below 2 minutes,
first set to 6 minutes then
turn it back.).
Drain selector
Spin timer
(To set to below 1 minute,
first set to 2 minutes then
turn it back. it can increase
the service life of the timer).
WATER INLET SELECTOR
WASH
SPIN
1.Water-filling selector
1 Set the water inlet selector at the "WASH" side.
(Figure 1)
2 Set the water level adjusting lever to needed line.
2. Fill the water and add the dissolved washing
powder to make the water level reach the preset
position. (Figure 2)
Run washing program for some time to stir and
dissolve the powder completely.
3.Put in the laundries. If the water quantity is
insufficient, please add water.
4.Select the current.
Select the strength of the current according to
the laundries. (Figure 3)
5.Select the washing time
Select the washing time according to the laundries.
(Figure 4)
6.After washing, set the "DRAIN SELECTOR"
at "DRAIN". (Figure 5).
Wash
Figure 1
Figure 2
Figure 3
2
Wash selector
(Strong current,
Standard current)
Figure 5
Figure 4