Safety precautions
Do not damage the power cord, bend , extend, twist, bind or alter it by force. Do not
press or nip it with weight. If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified person in order to avoid a
hazard. Keep the pin of the power plug clean, if the power plug is polluted with
dust, please wipe with dry cloth carefully. If the power cord or the power plug is
bad, to avoid risk it is required to have it replaced by the technicians of our
special shop or the after-sale service department.
The power cord plug should be
convenient to be pluged in or pluged
out with hand while the washing
machine runs normally. Be sure to pull
the plug out and close the water tap
when the machine is idle, when
moving the machine, or when cleaning
the machine. Do not use wet hand to
insert or pull out the power plug.
Do not let the machine share one
receptacle with other electric appliances.
If the power plug is damaged, or the
plugging into the receptacle is loose,
do not use the plug any more.
Do not wash water-proof laundries like
the raincoat, bike covers etc.
Do not use water hotter above 50 C .
Do not put the machine at damp place like
the bathroom. Never wash it with water.
Not put wet laundries on the control panel.
Please insert the power cord into special
receptacle with rated voltage. Be sure to
use single-phase three pins receptacle.
The earthing terminal of the receptacle
must be earthed reliably. If possible,
please adopt electric leakage protector.
