Haier HMV1472BHS, Installation Instructions Manual

Page: 10 / 84

16½"
(41.9 cm)
a
A
Center
Line
STYLE 2 - FRAMED, RECESSED CABINET
IMPORTANT:
The microwave must be level. Use a carpenter’s level to make
sure the cabinet bottom is level.
1. Draw a vertical line on the wall at the center of the 24" (61 cm) wide opening.
2. Place the Mounting Plate/Rear Wall Template onto the wall so that the
centerline of the template is aligned with the center line, and the top of the
template is touching the bottom of the cabinet. Tape the template in this
position.
a
3/8" TO EDGE
NOTE: IT IS
VERY IMP
ORTANT T
O
READ AND
FOLLOW
THE DIRECT
IONS
IN THE INSTAL
LATION INSTRUCT
IONS
BEFORE PROCEED
ING WITH TH
IS
REAR WA
LL TEMP LATE. This Rear Wa
ll Template se
rves to positi
on the botto m
mounting p
late and to locat
e the horizon
tal exhaust
outlet.
1. Use a leve
l to check t
hat the temp late is position
ed
accurately.
2. Locate and
mark at least o
ne stud on t he left or
right side of
the centerlin
e. It is important to use at lea
st one wood
screw mounte
d firmly in a s
tud to suppo
rt the weigh t
of the microw
ave. Mark tw
o additional, evenly sp
aced
locations for
the supplied
toggle bolts .
3. Drill holes
in the marked
locations. Wh ere there is
a stud, dri
ll a 3/16" hole
for wood scr ews. For hole
s
that do no
t line up with a stud, drill
5/8" holes fo
r
toggle bolts
.
DO NOT INS TALL THE M
OUNTING P
LATE
AT THIS TIME
. 4. Remove th
e template fr
om the rear w all.
5. Review the
Installation I
nstruction bo ok for your
installation
situation.
Locate and
mark holes t
o align with
holes in the
mounting pl
ate.
IMPORTA
NT: LOCATE A
T LEAST
ONE STUD
ON EITH
ER SIDE O
F
THE CENTER
LINE. MARK THE L
OCATION
FOR 2 AD
DITIONAL
, EVENLY
SPACED TO
GGLE BO LTS IN TH
E MOUNT
ING PLATE
AREA.
Locate an
d mark hole
s to align w
ith holes in t
he
mounting pl
ate.
IMPORTANT:
LOCATE A
T LEAST ON
E STUD
ON EITHE
R SIDE OF
THE CENT
ERLINE. MARK TH
E LOCATI
ON FOR 2
ADDITION
AL, EVENL
Y
SPACE D TOGGLE
BOLTS IN
THE MOU
NTING PLAT
E
AREA.
Trim the re
ar wall tem
plate along
the dotted
line.
Trim the re
ar wall temp
late along t
he dotted l
ine.
12"
4"
Darle vuelta
a la hoja pa
ra consultar
la
versión en E
spañol.
b
A
Center Line
B
30" (76.2 cm) to
cooktop
STYLE 3 - RECESSED CABINET WITH FRONT OVERHANG OR
DECORATIVE TRIM
IMPORTANT:
•
The microwave must be level. Use a carpenter’s level to make sure the
cabinet bottom is level.
•
If a decorative cabinet trim is interfering with the installation and leveling of
the microwave oven, remove the decorative trim.
•
If the cabinets have a front overhang, but no back or side overhang, to keep
the microwave level, place the mounting plate so that the distance from the
top of the mounting plate to the cabinet bottom is equal to the distance
from the bottom of the front overhang to the bottom of the cabinet.
8
ENGLISH