1
31-5000502 Rev. 0 04-20 GEA
Installation Instructions
Wind Baffle
WARNING
!
For personal safety, disconnect system power before installing this accessory.
During installation, if ground wires, screws, straps, clips, or other means of attaching grounding
components are removed, they must be returned to their original positions and fastened securely.
!
IMPORTANT SAFETY NOTICE
To avoid personal injury or property damage, this accessory
is to be installed only by a licensed and trained industry professional. The manufacturer will not
assume liability for unqualified installers or failure to follow these instructions.
Model: UAWB46A
Parts Included:
• Wind baffle (2 parts)
• 8 stainless self-tapping screws
• 4 screw covers
• This instruction sheet
Before you begin installation, read these instructions completely and carefully.
Observe all governing codes and ordinances as they may apply.
Leave these instructions with the owner.
Step 1:
Remove top screws from grille, slide the wind
baffle behind and replace the factory screws.
Step 2:
On some models, the grille screws can be used
in the same manner as the top. Use the sup-
plied screws if neede
d.
