19
5. Press “Signal” button, and the buzzer will sound upon end of a cycle.
• After switching on, the dryer automatically sets buzzer at “Softer”. The user may
define three prompt sound conditions: “Louder”, “Softer” and “Off”.
6. Press the “Wrinkle Saver” button to select a suitable reserved drying program.
• This convenient feature helps keep wrinkles from setting when you cannot unload the
dryer at the end of a cycle. The dryer will stop and then tumble for a brief period
every few minutes. Press the wrinkle saver button to choose the number of hours you
want, from 3 to 24. Stop the setting at any time by pressing the wrinkle saver button
or opening the dryer door.
• If not set, the wrinkle saver indicator will be off and remaining the time indicator will
be displayed.
• The LED display indicates remaining time of a non-reserved program. If setting
“Wrinkle Saver” in standby status, the LED display indicates 3 hr, which will
increase by 1 hr with each press (until 24 and return to 3). If held for 1.5 seconds,
LED display indicated value will increase continuously.
7. Press “Touch Up” button to select wrinkle-proof drying mode.
• You can also use the “Touch Up” cycle to remove wrinkles from clean clothes
packed tightly in a suitcase or closet.
8. Press “Start/Pause” button
• When starting the machine, first close the door and then press this button.
• If pause is needed during machine operating, press this button. Pressing again will
resume operation.
• Wrinkle saver 3-24 hours
• Sensor Dry Levels: Very, More, Normal, Less, Damp
• Temp Levels: High, Medium, Low, Air Dry
• Signal: Louder, Softer, Off
Autodry Cycle Remain Time
Sensor
Dry Level
Temp
Signal
Start/
Pause
Normal
60
very
High
Softer
Heavy
52
very
High
Softer
Whites
65
very
High
Softer
Bulky
62
very
High
Softer
Casual
35
very
Medium
Softer
Delicate
35
very
Low
Softer
Touch Up
25
N/A
Low
Softer
0-180
minutes
Custom Timed
Dry
40
N/A
High
Softer
Pass for Rack
Dry
60
N/A
Air Dry
Softer
English
English
