background image

Domestic Dishwasher

DW12-EFM SS

Code: 0120504986

Installation

Diagram

WR: Wiring box   IG: Power switch   IS: Door switch   P1: Water level switch   LS: Power indicator   LSS: Salt missing switch

LSB: Rinsing agent missing indicator    ISS: Softener switch    ISB: Dispenser switch    PS: Drain pump    EV1: Inlet valve

D-ED: Dispenser      ICR: Rapid Wash switch      ECO: Economic wash switch     I1/2: Half wash switch

TS58: 58

°

C temperature controller    TS50: 50

°

C temperature controller    ITR: Temperature limiter    R: Heater

Ev2: Softener valve    EV1/2: Half wash valve    ML: Washing motor     MT: Timer motor    IAQS: overflow switch

GB

The symbol         on the product or on its packaging indicates that this product may not be treated as household waste.

Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the

environment and human health, which could otherwise be caused by inappropriate waste handling of this product.

For more detailed information about recycling of this product, please contact your local city office, your household

waste disposal service or the shop where you purchased the product.

Summary of Contents for DW12-EFMSS







Reviews: