.6.
Basic Operation
¡æ
Clean the inner compartment before using.
¡æ
After the refrigerator is levelled and cleaned,wait
30 minutes or more before plugging in.
Start-up
¡æ
Clean the refrigerator briefly.
¡æ
After 2 or 3 hours of non-load operation,the inner
compartment is cold enough and suitable for food
storage.
Temperature selection
¡æ
Adjust the inner temperature according to the
ambientt temperature and the amount of food.
Note:foods get frozen under the circumstances
described below,
¡æ
The temperature regulator is set at an extremely
high setting . If so , reset the regulator to a proper
setting.
¡æ
In winter,ambient temperature is lower than 5
¡
.
2
3
4
5
Setting
Application
1-2
2-4
4-5
6-7
summer,ambient temperature 25
¡
-35
¡
Spring and autumn,ambient temperature 15
¡
-25
¡
Winter,ambient temperature 5
¡
-15
¡
Fast refrigeration or making ice.
After use,reset the temperature regulator to its
original setting.Otherwise foods in the refrigerator
may get frozen.
The technical data of the illuminating light is
240V,15W.
Unplug the appliance before replacing the light
bulb. Screw out the light bulb and replace it with a
new one.
Illuminating light
¡æ
¡æ
¡æ
Socket: E14 ( Light bulbs with the power larger
than 15W are strictly prohibited.)
.7.
Operation Instructions
Do not make the inner temperature lower than
necessary. Adjust the temperature regulator in ac-
cordance with the ambient temperature and the
amount of food.
To lower the power consumption, allow warm
foods and beverages to cool down before storing them
in the refrigerator.
For cold air circulation in the inner compartment, do
not overfill the shelves.
Wrap or pack the foods to be refrigerated sepa-
rately to keep the strong smells from giving off and to
keep the foods from being dried.
Ice preparation
Fill 4/5 the ice tray with water and place in the
lower part of the evaporator.
Set the temperature regulator at ‘7’.
After making ice, reset the regulator to its origi-
nal setting. Otherwise the foods in the refrigera-
tor may get frozen.
How to take out the ice cubes
To take out the ice tray, knock the ice tray lightly
to remove it from the evaporator.
Hold the bottom of the ice tray in running water
for a while.
Twist both sides of the ice tray to remove the ice
cubes.
