7-48
SECTION 7 –
SPRAY SYSTEMS
2. Attach an operator-supplied hose to the
end of the Solution Tank Drain Valve
Assembly (where Drain Valve Plug was
previously removed).
3. Turn the Solution Tank Drain Valve in the
OPEN (counter-clockwise) position and
allow solution to drain into an appropri-
ate container for storage.
NOTE: Always ensure that storage
containers and clearly marked with
what type of chemical is being
stored.
4.
When finished draining the solution
tank
, turn the Solution Tank Drain Valve
in the CLOSE (clockwise) position.
5. Remove hose from the Solution Tank
Drain Valve Assembly.
6. Tighten metal flange clamp.
RINSE SYSTEM
Your machine is equipped with a spin ball-
type Rinse System (two rotating rinse balls
located inside of the solution tank) to easily
and effectively rinse the solution tank,
solution pump, and spray booms with fresh
water, which protects against cross-
contamination of chemicals, as well as
reduces the risk of operator exposure. With a
100-gallon (378 L) rinse tank (mounted on
top of the solution tank) full of fresh water,
you may rinse the sprayer out immediately
after spraying while still in the field. The
Rinse System also reduces the extra costs of
large volumes of water, as well as additional
refilling and sprayer time that are associated
with conventional tank rinsing.
NOTE: Ensure the solution tank is
completely empty before activating
the Rinse System.
Refer to the chemical manufacturer’s
information for types of cleaning solution
combinations (water, cleaning agents, etc.)
Step 1 - Rinsing the Solution
Tank
1. Press the Main Tank Valve Switch
(located on the side console) in the
DOWN (Close) position.
Solution Tank Drain Valve Assembly
(Located beneath the solution
tank on underside of machine)
-Typical View
• Drain Valve
Plug
• Metal Flange
Clamp
• Solution
Tank Drain
Valve
NOTICE
Select a safe area to rinse the spray
system and clean the sprayer where
chemicals will not drift off to contaminate
people, animals, vegetation, or water
supply.
NOTICE
Never attempt to operate the Rinse
System without fresh water in the rinse
tank. Failure to comply will result in
equipment damage and will void the
warranty.