5-8
SECTION 5 –
MISCELLANEOUS
9. Start the engine.
10. Disengage the parking brake and slowly
back away from the attachment.
11. Raise the machine by pressing the Sus-
pension Button to the OFF (Inflate) posi-
tion.
CRADLE INSTALLATION -
60’ NTB
The 60-ft. NTB is equipped with separate
cradles. These cradles are shipped loose and
require installation before use of the NTB.
To Install Cradle
1. Insert Cradle Arm into the Cradle Recep-
tacle (located near the boom cradle on
side of machine), as shown.
2. Align Cradle Support Tube hole opening
with the Cradle Arm hole opening.
NOTE: The Cradle Arm is equipped with two
hole positions to allow you to install
the cradle as desired.
3. Insert Securement Bolt through the
aligned Cradle Support Tube and Cradle
Arm hole openings.
NOTICE
Install cradles before operating the 60’
NTB.
-Typical View
NTB Cradle Assembly
-Typical View
• Cradle
Arm
• Cradle
Receptacle
• Securement
Bolt
• Cradle
Support
Tube
NOTICE
Ensure securement bolt is properly
installed before operating the NTB.
Failure to comply may result in property
damage.
Cradle Receptacle
(Located near boom cradle
on side of machine)
-Typical View