1-1
5 - DASH / AUT
O
SECTION 1 – INTRODUCTION
The following patent decal is located on the
front of the attachment and provides current
patents issued on your Nitrogen Tool Bar.
NOTE: Hagie Manufacturing Company reserves
the right to make changes to any current
patents or patents pending at any time,
without notice.
A WORD FROM HAGIE
MANUFACTURING COMPANY
Congratulations on the purchase of your STS
Nitrogen Toolbar (NTB)! We recommend that
you review this operator’s manual and become
familiar with operating procedures and safety
precautions before attempting to operate your
NTB.
As with any piece of equipment, certain
operating procedures, service, and maintenance
are required to keep your NTB in top running
condition. We have attempted herein to cover all
of the adjustments required to fit varying
conditions. However, there may be times when
special care must be considered.
NOTE: The user is responsible for inspecting the
NTB and having parts repaired or
replaced when continued use of the
product causes damage or excessive
wear to other parts.
Hagie Manufacturing Company reserves the
right to make changes in the design and material
of any subsequent NTB without obligation to
existing units.
Thank you for choosing a Hagie NTB and we
ensure you of our continued interest in its
satisfactory operation for you. We are proud to
have you as a customer!
ABOUT THIS MANUAL
Hagie Manufacturing Patent Decal
(Located on the front of attachment)
NOTICE
The purpose of this manual is to guide
you in operating the Nitrogen Toolbar
(NTB). Read this manual in addition to
the sprayer operator’s manual, and all
other literature that is included with the
machine.
This manual is only intended to cover the
NTB attachment and any differences in
the operation of the sprayer controls.
Refer to your sprayer operator’s manual
for complete instructions on machine
operation.
NOTICE
Any pictures contained within this
operator’s manual that depict situations
with shields, guards, rails, or lids
removed are for demonstration only.
Hagie Manufacturing Company strongly
urges the operator to keep all shields
and safety devices in place at all times.