Hagie 204SP, Operator'S Manual, Page: 28 / 127

SECTION 3 –
CAB
3-2
Height Adjustment (3)
• Release Height Lock Lever by pulling
lever UP.
• Apply body weight slowly to lower seat
position.
• Remove body weight slowly to raise seat
position.
• When desired height is reached, release
lever to lock in position.
Backrest Adjustment (4)
• Rotate the Backrest Knob “counter-
clockwise” to tilt backrest forward or
“clockwise” to tilt backrest backward.
Armrest Adjustment (5/6)
• Unzip either armrest to expose the arm-
rest adjustment bolt.
• Turn bolt IN to raise armrest tilt or OUT
to lower armrest tilt.
Seat Belt
Refer to “Seat Belt” provided in the Safety
and Precautions Section elsewhere in this
manual for further information.
OPERATOR’S STATION
Steering Column
The steering column may be adjusted for
your driving comfort and ease of exiting and
entering the operator’s station.
Steering Column Adjustment
1. Push the Steering Column Tilt Lock
Lever (located near center of steering
column) in the DOWN position to release
steering column.
2. While maintaining the lock lever in the
down position, PULL or PUSH the steer-
ing column to desired position.
CAUTION
Ensure the steering wheel and steering
column are in the locked position before
attempting to operate the machine.
Failure to comply may result in difficulty
maintaining control of the machine.
-Typical View
Steering Column Tilt Lock Lever
(Located near center of steering column)
-Typical View