hager univers FW Manual Download

Page: 70 / 136

Mounting the body/wall cabinet
Wall installation

Technical changes reserved

5.3.2

Wall installation options

The wall cabinet can be attached to the wall in 3 different ways:

With the aid of built-in wall supports

Via the elongated holes on the sides of the body

Using VZ405N hollow wall anchors (accessory)

Attaching the wall cabinet to the wall with the aid of built-in wall supports

The wall cabinet can be screwed into the wall with the aid of the built-in wall
supports (which are bent back). Each 3- to 6-row wall cabinet contains
4 supports and each 7- and 8-row wall cabinet contains 6 supports.

Wall cabinets with bent back wall supports

Attaching the wall cabinet directly to the wall via the elongated holes on the sides of the
body

The wall cabinet can be directly attached to the wall via the elongated holes on
the sides of the body. See illustration below.

Summary of Contents for univers FW









































































































































Search results

Summary of Contents for univers FW

Reviews:

Related manuals for univers FW

Brands by name

Popular brands

hager univers FW, Manual

Search results

Summary of Contents for univers FW

Reviews:

Related manuals for univers FW

Brands by name

Popular brands