20
TJA670 domovea Basic
TJA470 domovea Expert
5.2.1.2
Interface
Click on
Interface
to view:
•
the
Device name
, which you can change, if necessary,
•
the
KNX address
of the configuration server, which you can change if necessary,
•
the
KNX Certificate
of the configuration server, enabling installation in KNX Secure,
•
the
KNX Serial Number
of the configuration serverthe
MAC address
of the configuration server,
•
the
IP detection
: automatic or manual (depending on requirements),
•
the
DNS server
: automatic or manual (according to requirements),
•
click on
Save
to confirm your choices.
Click on
Reset KNX/IP Interface
to reset the KNX connection settings.
If the KNX IP Secure process has been completed before the reset, simply reload the participant at ETS
level to recover the service.
5.2.1.3
Remote access
Remote access
enables connection to the configuration server and the client from a device connected to the Internet.
Click
Remote access
to view:
•
the
Remote address
field: the http address link of the configuration server,
•
Use of remote access
(default value: activated): enables the installer to intervene remotely,
•
click on
Save
to confirm your choices.
You can connect remotely using:
•
hager Pilot or domovea client.
o
select server TJA670-XXXXX or TJA470-XXXXX.
If the server does not appear on the list,
o
click
Add a server
,
o
add the server by entering either:
▪
The IP address
▪
The name of the server (TJAxxx-xxxxxx)
▪
The serial number
To add a remote server (not connected to the local network), you must enter the serial number of the
device. This is visible in the
Remote Access
menu where the serial number is contained in the address (For
example: https://kj4f6s8kvcywvd.domovea.com, the serial number will be
kj4f6s8kvcywvd
).
•
a device connected to the Internet
o
launch the
WEB
browser,
o
in the address box, enter the pathway for remote access (for example:
https://kj4f6s8kvcywvd.domovea.com
o
the WEB browser launches at the login page. Enter the
User name
and
Password
.
For more information, please see tutorial
5
– Enable remote access with easytool and with domovea
