hager New VegaD, Technical Manual

Page: 50 / 127

Accessories
50 Technical changes reserved
Pos. 1:
Part can be snapped-in into 3 diff erent depths (20 mm raster) and loosen though fi nger pressure under
orange DIN rail holder.
Pos. 2:
Part can be snapped-in into 3 diff erent depths (20 mm raster) and loosen though fi nger pressure under
orange DIN rail holder. Tehalit trunkings BA7A / HA7 can be snapped on part cutted-out like this.
Through 20mm raster, depth of vertical trunking cover can be adapted to horizontal trunking cover
depth (as Tehalit trunkings are 60, 80 or 100mm high)
Pos. 3:
Part can be snapped-in into 3 diff erent depths (20 mm raster) and loosen though fi nger pressure under
orange DIN rail holder. Cover 30mm width from Tehalit trunking BA7A / HA7 can be snapped on part
mounted in this 180° turned position. Through 20mm raster, depth of vertical cover can be adapted to
horizontal trunking cover depth (as Tehalit trunkings are 60, 80 or 100mm high)