1
6LE002831A
2
6LE002831A
Programming :
1. To start programming, press key
“
Prog
”, the first program step
flashes.
2. Set the first switching time with key “
+
”
or “
-
”
3. Use the “
on/off
” button to choose between
circuit:
ON and circuit OFF.
ON = work authorization period.
OFF = work banning period.
4. Enter the settings by pressing
“
Prog
” (short press).
You must now choose
the days of the week
that the settings apply to.
5. With key “
+
” and “
-
”, display one after the
other each day of the week and select with
key “
on/off
” if the program applies to this
day or not.
Days to which the switching is to be applied
must be visible at the bottom of the display
e.g. 1 2 3 4 5 visible, means switching will
be applied Monday to Friday.
6. Press “
Prog
” to enter this program step.
7. To adjust the time settings
as well as the assignments to the
days of the week ;
Repeat operation 2 to 6 for further
programmes. (maximum 20)
If no buttons are pressed within 2 min.,
the device switches back to automatic mode
without recording your settings.
8. To record your settings and
return to automatic mode press
“
Prog
” for more than 2 seconds.
The programmable light sensitive switch EE171 has
two main functions:
• a light sensitive switch comprising:
Override selector switch to allow permanent
setting ON or OFF, auto or test mode.
Lighting range selector.
Potentiometer to set light level.
Indicator to show output switching.
• a programmer to establish the automatic
operating cycle.
The programmer comprises 4 keys:
on/off
to choose whether the circuit is on or off
Prog
to set the program and scroll program
steps
reset
+
and
-
to change settings
On the display are indicated :
A. the current time
B.the working status ON (authorization) or
OFF (banning)
C.The days to which the program applies.
(1= Monday, 2 = Tuesday ...............7 = Sunday)
Setting time and day:
Press key + or -.
A continuous pressing on this keys will scroll up or
down minutes, hours and then days.
6L
E
00
28
31
A
EE171
Operating principle:
The EE171 programmable light sensitive
switch controls light sytems according to
a
program set by the user, depending on natu-
ral illumination.
- during the work authorization period, de-
pending on wether the measured light level
is below or above the required level, it will
be switched on or off.
- during the work banning period, the contact
remains open, whatever the light level is.
The light sensitive switch includes a built in
time delay which avoid unnecessary switching
due to temporary factors such as car beams
etc...
Description:
Lux
T
6:00
8:00
17:00
23:00
ON
ON
OFF
OFF
OFF
11
10
12
N
5
1
2
L
6
6E
05
85
a
230 V
50 Hz
16A 250V
10
11
12
AC1
test
auto
2000
50
Lux
100
5
12
12
77
88
99
10
10 11
11
66
11
22
33
44
55
12
7
8
9
10 11
6
1
2
3
4
5
on/off Prog
+
To check your settings :
In automatic mode :
Press “
Prog
” repeatedly to display the day, the
time and the circuit status (ON or OFF).
To switch back to automatic mode, press
“
Prog
” for more than 2 sec.
To reset the time switch :
Press the “
reset
” button, the program will be
cancelled.
z
Programmable light
sensitive switch
y
Technical specification:
Electrical specification
- Voltage rating :
230V ~+10/-15% 50 Hz
240V~ +/-6%
- Consumption :
1,5 VA max.
- Output : 1 voltage free changeover contact
- Max. breaking capacity :
- AC1
16A 230V~
- Incandescent lamp
2000W 230V~
- Halogen lamp
1000W 230V~
- Fluorescent lamp :
- Uncompensated
1000W 230~
- Compensated in series (10µF)
1000W 230V~
- // compensated (15µF)
200W 230V~
- Duo
1000W 230V~
- Upstream protection:
circuit breaker 16 A
- Action type:
1B
- Pollution category:
2
- Rated impulse voltage:
4 kV
- Max. altitude:
<2000m
- Software structure:
class A
- Voltage and current declared for the needs
of EMC emissions tests:
230V~ / 0.5A
Functional characteristics
- 2 sensitivity ranges
5 to 100 lux
50 to 2000 lux
- Weekly cycle
- 8 predefined programs
- Program setting :
1 minute increments
- Accuracy :
± 6 min./ annum
- Operating reserve : lithium battery total of
3 years of supply failure
- On and off delay :
15 to 60 s.
- Working temperature :
-30 °C to +60 °C (cell),
-10 °C to +45 °C (Modular device)
- Storage temperature :
- 20 °C to +60 °C
- Protection class (cell) :
IP54
- Insulation class (cell) :
II
- Independent panel-mounted (DIN rail)
control device
Connection capacity
- Modular device :
0,5 to 4 mm
2
- Cell :
0,75 to 2,5 mm
2
- Max lenght between cell and modular
device :
50 m
- Mounting of the cell with 2 screws
Ø 2,5 mm
Size
- Between:
3
0
(17,5 mm x 3)
- Cell :
( 32 x 48 x 37 mm)
Permanent overrides
the override selector
allows permanent
overrides which have priority on programming
and the measured light level.
permanent override "ON"
permanent override "OFF"
Setting of the working level:
The test position of the override selector
makes easier the setting of the working level, it
removes the ON and OFF delay.
Select the sensitivity range which suits whith
the appliccation (selector
)
5 to 100 lux (low light level)
applica-
tion examples : public
lighting, shop
windows, signals..
50 to 2000 lux (high light level) applica-
tion examples : control of shades.
At the appropriate moment of the day, put the
selector
in “
test
” position ; turn the poten-
tiometer
up to the switching point (the indi-
cator
lights) ; put the selector back to
position “
auto
”, the normal operating mode of
the device.
Mounting of the cell:
To ensure a good working of the light sensitive
switch, the cell must not be influenced by arti-
ficial light or direct solar radiation and has to be
sheltered from dust and humidity.
In case of disconnection of the link between
the cell and the light sensitive switch, the out-
put of the device will be switched on.
test
auto
test
auto
L
N
1
10 11 12
2
5 6
A
Make sure the light sensitive switch is
unplugged before connecting the cell.
A warranty period of 24 months is offered on hager
products, from date of manufacture, relating to any material
of manufacturing defect. If any product is found to be de-
fective it must be returned via the installer and supplier (who-
lesaler). The warranty is withdrawn if:
- after inspection by hager quality control dept the device is
found to have been installed in a manner which is contrary
to IEE wiring regulations and accepted practice within the
industry at the time of installation.
- The procedure for the return of goods has not been
followed. Explanation of defect must be included when re-
turning goods.
z
Warranty
NOT APPLICABLE FOR AUSTRALIA
Correct Disposal of This product (Waste Electrical & Electronic
Equipment).
(Applicable in the European Union and other European countries
with separate collection systems).
This marking shown on the product or its literature indicates that it
hould not be disposed with other household wasted at the end of its working
life. To prevent possible harm to the environment or human health from un-
controlled waste disposal, please separate this from other types of wastes
and recycle it responsibly to promote the sustainable reuse of material re-
sources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they
can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and condi-
tions of the purchase contract. This product should not be mixed with other
commercial wastes of disposal.
Usable in all Europe
å
and in Switzerland
Load output connection: If load intensity
is >10A use cables with at least a 2.5mm²
diameter
This device must be installed only by
a qualified electrician according to the
installation standards in force in the
country.
