![Hägele CLEANFIX Operating Instructions Manual Download Page 4](http://html1.mh-extra.com/html/hagele/cleanfix/cleanfix_operating-instructions-manual_3184273004.webp)
EN
GENERAL INFORMATION
4
1.2
Introduction
Before installing or starting up the Cleanfix
®
reversible fan, familiarize
yourself with the contents of these operating instructions. This facilitates
safe and efficient handling of the product.
The operating instructions are a component of the product and must always
be close at hand. This ensures the following:
accidents are prevented.
warranty terms are complied with.
1.2.1
Target group of these operating instructions
These operating instructions are intended exclusively for mechanics trained
on agricultural machinery.
The product may be installed and started up only by persons who are
familiar with the operating instructions, the product, as well as the national
laws and regulations concerning work, safety, and accident prevention.
1.2.2
Liability and damages
Since we are not included in technical service updates from the
manufacturer, you may be required to make adjustments when installing
this product. Hägele GmbH does not assume responsibility for installation
and modification costs.
On account of the information provided in these operating instructions, the
manufacturer accepts no liability for direct damages or indirect losses
arising from improper operation or maintenance. In the same way, we
assume no liability for personal injury or property damage caused by
untrained personnel or through failure to comply with regulations
concerning work, safety, and accident prevention.
No claims for modification of products that have already been delivered
may be made on the basis of the data, illustrations, and descriptions in
these operating instructions.
For your safety, use only original spare parts and original accessories.
We assume no liability for the use of other products and any resulting
damages.
Observe the following before installation or start-up:
Inspect delivery for damage in transit and for completeness.
Immediately document in writing any defects and damages.
Photograph damaged components.
Send in a written damage report.