– 19 –
1. Connect signal from source to both CH A and CH B
inputs.
2. Move Stereo/Biamp switch to Stereo input mode.
3. Move Stereo/Mono switch to Stereo mode.
4. Select desired speaker load (8
Ω
/4
Ω
/2
Ω
) for each
channel – CH A & CH B loads do not need to match.
5. Connect appropriate speaker load 8
Ω
/4
Ω
/2
Ω
to 5-way
binding posts.
6. Adjust CH A & CH B level controls independently.
1. Connect signal from source to CH B input.
2. Move Stereo/Biamp switch to BIAMP input mode.
3. Move Stereo/Mono switch to Stereo mode.
4. Select desired speaker load (8
Ω
/4
Ω
/2
Ω
) for each
channel — CH A and CH B loads do not need to match.
5. Connect appropriate speaker load 8
Ω
/4
Ω
/2
Ω
to 5-way
binding posts.
6. Adjust CH A & CH B level controls independently.
-
Wiring Diagrams
-
STEREO MODE (GX2300/GX2600)
BIAMP MODE (GX2300/GX2600)
Summary of Contents for GX2300
