
21
H
D
E
0
8
/2
018
73
2.2
9
.1
95
1. Notes on these installation and maintenance instructions
The instructions are part of the access control system and must be kept in the
immediate vicinity of the system and be accessible for the personnel at all times.
The personnel must read and understand these instructions carefully before starting
any work. A basic requirement for safe work is the observance of all safety notes
and handling indications specified in these instructions.
Furthermore, the local health and safety regulations and general safety regulations
for the area of application of the system apply.
Associated documents
In addition to these installation instructions, the following documents are valid for the
access control system:
• installation and maintenance instructions of the WTC 200 Controller
• Dialock 2.0 user manual or updated version
1.1 Contents and
target group of the
installation and
maintenance
instructions
It is essential to pay attention to these installation and maintenance instructions in
order to install the product successfully and safely. Please pay attention to all of
the specified installation steps, instructions and notes!
These
installation and maintenance instructions
are intended for:
• the
operator
of the product
• the
installer
of the product
In addition to these
installation and maintenance instructions
, both groups of
people must also have read the complete Dialock user manual before handling the
product.
1.2 Obligations
of the installer
The installer has the following obligations:
• All notes and specifications in the installation and maintenance instructions
must be complied with. The installation steps must not be deviated from or
varied.
• Only the supplied original parts must be installed.
• The installation and maintenance instructions must be handed to the operator
after installation has taken place.
1.3 Obligations
of the operator
The operator has the following obligations:
• The installation requirements must be adhered to.
• The product may only be installed and started up by qualified experts.
• The installation and maintenance instructions must be kept until the product
is disposed of, and handed to the new operator in the event of a change of
operator.
Installation and maintenance instructions - English
ins-src-732.29.195_book.book Seite 21 Donnerstag, 9. August 2018 8:56 08