Hafele HH-IS90A, User Instructions

Page: 27 / 40

- 27 -
• Commands (Fig.22):
Push-button A = On/off lights switch.
Push-button B = On/off cooker hood switch. The appliance
switches on at speed level 1, If the cooker hood is on depress
the push-button for 2 sec. to switch off the cooker hood. If
the cooker hood is at speed level 1 it will not be necessary
to depress the push-button to switch the cooker hood off.
Decreases the motor speed.
Display C =
Indicates the motor speed level selected and
activates the timer.
Push-button D =
Switches on the cooker hood. Increases the
motor speed. Touching the key at 3rd speed, the intensive
function runs for 10’, then the appliance go back to work at
the original speed. During this function the display blinks.
Key E =
The Timer times the functions on activation for 15
minutes, after which they are switched off. The Timer is deac-
tivated by re-pressing
Key E
.
When the Timer is activated the decimal point must flash on
the display. The Timer cannot be activated if the intensive
speed is functioning.
The “ clean air ” function is activated by pressing key E for 2
seconds when the appliance is switched off. This switches the
motor on for 10 minutes every hour at the first speed. During
functioning a rotary movement of the peripheral segments
must be visualised on the display. When this time has passed
the motor switches off and the fixed letter “ C ” must be visual-
ised on the display until the motor re-starts after 50 minutes
for another 10 minutes and so on. Press any key apart from
the light keys to return to normal functioning. Press key E to
deactivate the function.
• Anti-grease/active charcoal filters saturation:
- When display item
C
flashes, at a speed where it alternates
with the letter
F
(e.g.
1
and
F
), the anti-grease filters must be
washed.
- When display item
C
flashes, at a speed where it alternates
with the letter
A
(e.g.
1
and
A
), the active carbon filters must
be replaced or washed depending on the type of filter.
After the clean filter has been positioned correctly, the
electronic memory must be reset by pressing button
A
for
approximately
5 seconds
, until the indication
F
or
A
shown
on the display
C
stops flashing.
• Commands mechanical (Fig.23 .A.B ) the key symbols are
explained below:
A = LIGHT
B = OFF
C = SPEED I
D = SPEED II
E = SPEED III
G = MOTOR WORKING indicator.
• Commands luminous (Fig.24 .A.B ) the key symbols are
explained below:
A = LIGHT
B = OFF
C =
SPEED I
D =
SPEED II
E =
SPEED III
F =
AUTOMATIC STOP TIMER - 15 minutes
(*)
If your appliance has the
INTENSIVE
speed function, from
speed THREE, press key
E
for 2 seconds and it will be activated
for 10 minutes after which it will return to the previously set
speed. When the function is active the LED flashes.
To interrupt it before the 10 minutes have elapsed, press
key E again.
Some models allow activating this function even with speed
one and two.
By pressing key F for two seconds (with the hood switched off)
the “ clean air ” function is activated. This function switches the
appliance on for ten minutes every hour at the first speed. As
soon as this function is activated the motor starts up at the
first speed for ten minutes. During this time key
F
and key
C
must flash at the same time. After ten minutes the motor
switches off and the LED of key
F
remains switched on with
a fixed light until the motor starts up again at the first speed
after fifty minutes and keys
F
and
C
start to flash again for ten
minutes and so on. By pressing any key for the exclusion of
the hood light the hood will return immediately to its normal
functioning (e.g. if key
D
is pressed the “
clean air
” function is
deactivated and the motor moves to the 2nd speed straight
away. By pressing key
B
the function is deactivated).
(*)
The “
AUTOMATIC STOP TIMER
” delays stopping of the
hood, which will continue functioning for 15 minutes at the
operating speed set at the time this function is activated.
• Anti-grease/active charcoal filters saturation:
- When the A key flashes with a 2 second frequency the anti-
grease filters must be washed.
- When the A key flashes with a 0.5 second frequency the
active carbon filters must be replaced or washed depending
on the type of filter.
Once the clean filter has been put back one must reset the
electronic memory by pressing the A key for approximately 5
seconds until it stops flashing.
• Mechanical controls (Fig.25) the symbols are as follows:
A =
LIGHT/ON-OFF key
B =
OFF/FIRST SPEED key
C =
SECOND SPEED key
D =
THIRD SPEED key.
If the hood is shut off at first, second or third speed, when
it is turned back on, it will start at the same speed it was in
when switched off.
• Controls (Fig.26):
NOTE:
with this command the appliance can also be controlled
with a remote control to be requested as an accessory.
Power key (A) =
If the appliance is set up to support other
functions such as automatic openings, room lights, etc., this
key enables these functions.
Attention! In some models this key does not enable any
function and if pressed it turns on the corresponding LED for
approximately 15 sec.
-OFF key (B) = Key for reducing speed and switching off.
+ON key (C) = From the OFF position, by pressing the C key
once, the motor goes to 1st speed, twice for 2nd speed, three
times for 3rd speed; at each speed change, the LED changes
colour.
By pressing the B key, the speed reduces and the LED turns to
the typical colour of the speed.
Intensive key (D) = With the motor running and at any speed,
pressing the
D
key inserts the INTENSIVE speed (4th speed)
for 10 minutes. During this function the LED flashes, and the
speed LED previously set turns out.
After 10 minutes, the hood returns for the last set speed with
the relative LED indication.
- If you wish to deactivate the function before the 10 minutes
are up, press the B key.