Tools Required (Not supplied)
Component parts
Cupboard Pull Out-Basket:
Assembly guide
•
Make sure all the components are included before
you start.
•
The number for technical support is at the bottom
Of the page.
•
Dont rush!
•
Read the instructions first.
•
Assemble in the stages shown.
•
Keep the fittings together to avoid loss.
•
Have fun.
SW4 Allen key
2 x Runners (B)
2 x Support
bracket (F)
16 x 4.0 x 13.0 mm
Pan head screw
(C)
28 x 3.5 x 13.0 mm
Counter sunk screw
(D)
4 x 3.5 x 25.0 mm
Counter sunk screw
(E)
1 x Basket (A)
Digram 2
300/500 mm
cabinet width
450
385
27
Front edge of carcase
36
49
68
164
260
356
379
401
420
443
20
Cabinet base
Using the runner drilling pattern shown in digram 1, fix
cabinet member of the runners (B) to the inside face of
the cabinet, using 7 x 3.5 x 13.0 mm counter sunk
screws (D) per cabinet member.
1
2
Fit pre made base board (not included) to drawer member of
runners (B) using 7 x 3.5 x 13.0 mm counter sunk screws (D)
per drawer member, see diagram 2.
Fit drawer font (not included) to runner brackets using
3 x 4.0 x 13.0 mm pan head screws (C) per bracket
and adjust brackets as necessary, see diagram 3.
3
Diagram 1
Pencil
Bradawl
Spirit Level
Cross Head Screwdriver
Tape measure
Did you know Häfele also supply tools to the trade and industry?
See www.hafele.co.uk for more information.
Digram 3
Size of base board =
450 mm deep x
internal width - 24 mm
FITT_10088
Issue - 01
Sales and Technical Support -
Tel: 01788 542020, Fax: 01788 544440, E-Mail: [email protected]
