H
D
E
0
4
.1
0.
2021
732.
22.
02
4
68
8.4.2 User key allocation by unlocking the locks
In keyed different operation, a maximum of one MLA 8 can be connected to the
FT 200.
Locks which are not to be allocated to the respective user key must be safeguarded
against unintentional unlocking (e.g. with a small wedge, adhesive tape or the like).
Several user keys can be allocated to one lock.
Example:
• User key 1: Locks 1, 3, 5
• User key 2: Locks 3, 5, 7, 10
• User key 3: Locks 1, 2, 5, 10, 12
Prerequisites:
Programming key card
User keys
1. Hold the programming key card in front of the
antenna until the acoustic signal sounds 3x.
The LED illuminates in green.
All locks are unlocked.
The programming mode for normal user keys is
now active for 10 seconds and the LED flashes in
green.
2. Manually unlock all locks to which the user key
is to be allocated.
3. Hold the required user key in front of the
antenna.
The LED continues to flash in green.
All locks are briefly locked so unlocked locks
can be recognised.
A brief acoustic signal is heard
The user key is now allocated to all unlocked
locks.
4. Remove user key.
The LED continues to flash in green for
approx 10 seconds.
If no other user keys are allocated,
programming mode ends automatically and
the LED switches to red.
All locks are locked.
5. Lock all unlocked locks manually.
Tag-it ™ISO
3x
#1
#2
#...
10 s
#1
#2
#...
#1
#2
#...
10 s
ins-src-732.22.024.book Seite 68 Mittwoch, 13. Oktober 2021 1:58 13