3
1. SAFETY INFORMATION
For your safety and correctoperation of the appliance, read this manual
carefully before installation and use. Always keep these instructions with the
appliance even if you move or sell it. Users must fully know the operation
and safety features of the appliance.
The wire connection has to be done by specialized technician.
The manufacturer will not be held liable for any damages resulting from
incorrect or improper installation.
•The minimum safety distance between the cooker top and the e
hood is 650 mm (some models can be installed at a lower height,
refer to the paragraphs on working dimensions and installation).
•If the instructions for installation for the gas hob specify a greater
this must be respected.
•Check that the mains voltage corresponds to that indicated on the
plate fixed to the inside of the hood.
Means for disconnection must be incorporated in the fixed wiring in
accordance with the wiring rules.
For Class I appliances, check that the domestic power supply
adequate earthing.
•Connect the extractor to the exhaust flue through a pipe of minimum
diameter 120 mm. The route of the flue must be as short as possible.
•Regulations concerning the discharge of air have to be fulfilled.
•Do not connect the extractor hood to exhaust ducts carrying
fumes (boilers, fireplaces, etc.).
•If the extractor is used inconjunction with non-electrical appliances (e.g.
burning appliances), a sufficient degree of aeration must be guaranteed
the room in order to prevent the backflow of exhaust gas. When the cook
hood is used in conjunction with appliances supplied with energy other
electric, the negative pressure in the room must not exceed 0,04 mbar
prevent fumes being drawn back into the room by the cooker hood.
Summary of Contents for 533.89.001
Page 12: ......
