Hafco TM-33170HDX, Instruction Manual

Page: 12 / 59

2-3 Electrical Cautions
1. After wiring, check the rotation of the spindle of the spindle. Turn the main
switch “ON” and make sure the safety of spindle. Then push intermittent button
(T) momentarily. The correction direction of the spindle rotation is counter
clockwise. (looking from tailstock for a downward movement of the spindle
operation control lever.) Wrong direction of rotation can be rectified by
interchanging any two of the three phase lines (R.S.T.) in the power source.
2. Checking each lubrication system with oil.
3. Checking each handle with normal function.
4. Checking belt Tension Adjustment in good condition.
5. Read and understand for each constructer well before operation.
6. When power indicator “ON”, overload circuit breaker and electric magnetic
contactor to protect motor from burning out by overload, please reset the circuit
breaker by press the recover plate and lathe will resume to available. (The
electric wiring attached at chapter 2-4)
Page 12 Instruction Manual for TM-33170HDX (L646D) 26/11/2014