Haes ESPRIT-G, Installation, Commissioning & Operating Manual

Page: 76 / 88

ESPRIT Gas Extinguishing User Manual CONFIGURING THE PANEL
76
Approved Document Ref: UI-ESG-01 Issue 2.0
Report Menu: Versions
To access the software Versions information:
•
On the Main Menu , use Left/Right arrow keys to move cursor box to Report menu.
•
Press
✓
key to select the Report menu.
•
Under Report Menu , select the Versions option and then press
✓
key to access it.
•
Versions information will be displayed, as follows:
DISPLAY: VER: n.n_nnnn
SITE DATA: dd-MMM-yy hh:mm:ss nnnn
PSU: VER: n.nn
GAS AREA ONE: VER: n.n.nn
GAS AREA TWO: VER: n.n.nn
Where:
n = displayed number
dd = day
MMM = Month
yy = year
•
Next, press return key or
✓
key to return to the Report Menu .
Report Menu: COUNTER
To get ALARM COUNT information:
•
On the Main Menu , use Left/Right arrow keys to move cursor box to Report menu.
•
Press
✓
key to select the Report menu.
•
Under Report Menu select the COUNTER option and then press
✓
key to access it.
•
The ALARM COUNT sub-menu will open, and the following information will be available:
ALARM COUNT: nnnn (number ( n ) of alarm events that have occurred)
LAST ALARM AT: dd-MMM-yy hh:mm:ss (date and time when the last event
happened)
HOLD DOWN SELECT TO RESET:
•
To reset the alarm count, press and hold down
✓
key and the following will be displayed:
Enter Level 4 Access Code
0 _ _ _
•
Use the keypad to enter code 4444:
o
Press
✓
key
o
Use the Up/Down arrow keys to increase/decrease the number value of the first digit
in the 4-digit sequence.
o
Use the Left/Right arrow keys to move to the next digit in the 4-digit sequence
o
When all 4 digits have been set to the code 4444 press
✓
key once again.
•
This action will clear to zero the value of any Alarm Count (if more than zero). A short
acknowledgement sound will be present.