Protocol Settings
129
Haemonetics
®
Cell Saver
®
Elite
®
+ User Manual
P/N 130859-US, Manual Revision: AA
Modifiable Settings
Default Settings
The following tables list the Haemonetics default settings for the Cell Saver
Elite+ device:
Cell Salvage
Default Settings
Table 15, Cell Salvage Default Settings
Parameter
Values
Default
Notes
Fat Reduction
On/Off
Off
Auto-Fill
On/Off
On
Partial Bowl Wash
Ask/Single/
Double
Ask
Pump Regulation
On/Off
On
Pump regulation is not applicable for
the 70 mL bowl.
Quick Transfer
On/Off
Off
This parameter is displayed only if it
has been enabled in Options. See
“Making the Quick Transfer and
Manual Mode Settings Available” on
page 136
for more information.
Manual Mode
On/Off
Off
This parameter is displayed only if it
has been enabled in Options. See
“Making the Quick Transfer and
Manual Mode Settings Available” on
page 136
for more information.
Final Cycle:
On/Off
Off
Only one of the sub-settings below
can be active at a time:
Last Partial Bowl Wash
Double/
Single/Off
Double
This sub-setting can only be
modified if Final Cycle is set to On.
End Procedure
On/Off
Off
This sub-setting can only be
modified if Final Cycle is set to On.
Wash Line Priming
On/Off
On
Recentrifuge Delay
On/Off
On
Parameter
225 mL Bowl
125 mL Bowl
70 mL Bowl
Min
Max
Step
Fill Start Volume (mL)
800
800
400
200
3000
100
Fill Resume Volume (mL)
400
400
200
200
3000
100
