HADEF 43/86E-Liftboy, Installation, Operating And Maintenance Instructions

Page: 23 / 25

5.52.288.00.01.06
23
14.2 Gearbox
The worm gear is maintenance free.
The teeth of the spur gear for winches from 250 kg pulling rope force and up must be re-lubricated at least
once a year.
Lubricant recommended: grease Renolit FEP2
14.3 Electric motor
For the motor it is sufficient to keep the cooling airways clean and monitor the roller bearing and its
lubrication status.
A high temperature fat must be used if the roller bearing is replaced.
CAUTION!
Brake linings and surfaces must always be clean and fat-free. Even very small amounts of dirt can reduce
the braking moment considerably.
14.4 Lubricant selection
FUCHS SHELL ESSO ARAL MOBIL TOTAL CASTROL KLÜBER
Renolin PG 220 Tivela S 20 Glycolube 220 Degol GS 220 Glygoyle 30 CARTER SY 220 -- Klübersynth GH 6-220
Renolin PG 320 Tivela S 320 Glygolube 320 Degol GS 320 Glygoyle 320 -- -- Klübersynth GH 6-320
Renolin PG 460 Tivela S 460 Glygolube 460 Degol GS 460 Glygoyle 460 -- Alphasyn PG 460 Klübersynth GH 6-460
Renolit FEP2 Alvania EP2 Unirex EP2 -- Mobilux EP2 MULTIS EP2 -- --
Renolin B10 VG32 Tellus Oil 32 -- -- -- -- -- --
Stabylan 5006 -- -- -- -- -- Optimol Viscoleb 1500 Klüberoil 4UH 1-1500
Chain lubricant OKS 451
14.5 Lubricant for food industry – selection (as option*)
FUCHS SHELL MOBIL CASTROL KLÜBER
Gear Geralyn SF 220 Cassida Fluid GL 220 Glygoyle 220 Optimol GT 220
Klübersynth
UH1 6-220
Driving gear Geralyn SF 320 Cassida Fluid GL 220 Glygoyle 320 Optimol GT 320
Klübersynth
UH1 6-320
Load chain -- -- Lubricant FM 100 Optimol Viscoleb 1500 --
Load hook
Pulley
Spur gear
Pinion
-- FM Grease HD 2 Mobilegrease FM 222 -- --
* must be mentioned by order
15 Trouble
Please pay attention to the following in case of problems:
Troubles with the equipment must only be repaired by qualified personnel.
Secure the unit against unintended operation start.
Put up a warning note indicating that the unit is not to be used.
Secure the working area of moving parts of the unit.
Please read the chapter "Safety instructions".
Notes on the repair of faults are found in the following table.
For the repair of failures please contact our service department.
CAUTION!
Trouble caused by wear or damage to parts such as wire ropes, chains, chain wheels, axes, bearings,
brake parts, etc., must be remedied by replacing the parts with original spare parts.