QUICK START GUIDE
1. General information
1. Wrist unit
2. Hand unit
3. Glove attachment
Detailed user manual:
hackmotion.com/user-manual
Support:
4. Power button
- press once to switch the sensor on
- press and hold (3 seconds) to switch it off
5. Micro USB socket for charging the battery
6. Charging indicator (red - charging and ‘off’ when fully charged)
7. Bluetooth connection indicator (blue; ‘on’ when connected)
8. Power indicator (yellow)
Golf Sensor HM-G-2-100
(iOS and Windows)
1
3
4
2
5
6
7
8
3.2.2. Install HackMotion software.
- Download it from: hackmotion.com/downloads
- Launch software installer.
- Accept Windows security warning if prompted (Click ‘More info’
and then ‘Run’) and complete the installation.
2. System requirements
2.1. iOS
- Any device running iOS 11 or later.
2.2. Windows
- At least Windows 10 operating system on your PC. Bluetooth
connection (if your computer does not have a built-in Bluetooth
adapter any Bluetooth USB dongle should do the job).
3. Setting up the system
3.1. iOS
- download HackMotion app from Apple App Store.
3.2. Windows
3.2.1. Pair the sensor
- Make sure your Windows Bluetooth service is enabled.
- Switch the sensor on by pressing the power button. The yellow
LED indicator will light up.
- Pair the device with your PC in Windows Bluetooth settings (has
to be done only once – during initial setup).
Important!
Close Windows
Bluetooth settings
window after the
sensor is paired with
your computer.
There are two ways to wear the hand unit
A. Attaching it to glove velcro
with included clip.
B. Wearing it with palm strap.
Important!
It self fixates when stretched
horizontally.
Important!
Pay attention to correct
direction of the clip.
