Safety
page 24 of 36
QSL-T/QST-150-25/45 V2
Standard
Original operating manual
Rev1.2
2.3
Type of use
The product is intended for use:
•
Outdoor:
YES
(under appropriate framework conditions)
•
In sheltered and indoor rooms:
YES
•
on/ under/ in the Water:
YES
(under appropriate framework conditions)
•
potentially explosive area:
NO
•
underground:
NO
•
As safety relevant engine in man carrying aviation:
NO
•
In the food industry:
NO
•
In the medical sector:
NO
2.4
Authorised persons
Following persons are authorised to use the product:
Group of persons
Work
Qualification
Transport personnel
Transport
Apprenticeship and experience in the
sector of transport and logistics
Assembly personnel
Installation, mechanical
Assembly
Apprenticeship in the sector of
mechanical engineering, experience
in the assembly of machines
Qualified electrician
Electrical installation
Apprenticeship in the sector of
electronics, experience in working
with electricity
Maintenance personnel
Cleaning, Inspection
Apprenticeship in the field of
machine maintenance
Operator
Operation
Instructed by the operator
Manufacturer
Reconditioning, repair
WARNING
The operator is only authorised to use the product, if the initial operation is done and all
necessary protection requirements of the applicable product standards and guidelines have
been fulfilled.
2.5
Safety instructions
To avoid injuries and property damage, it is important to read the following safety instructions
carefully and to follow them at all times.
DANGER
Electric shock
Due to the direct connection to the alternating current supply network
The motor must only be operated with a suitable speed controller and may never be
connected directly to a power supply.
The motor may never be connected directly to the 230 or 400V AC mains.
