94
Communication setup
4.
Enter the phone numbers of the individual pagers you wish to send the message to.
This is usually the phone number that is given to the pager when it is purchased.
Press
ACCEPT
.
8.2.2.2 Reporting devices
The reporting order of the communication devices can be set to Modem Only, Pager
Only, Pager Then Modem, and Modem Then Pager.
1.
Press
CHANGE CHOICE
until the desired reporting method is displayed then press
ACCEPT
.
When the sampler calls the pager service, it will transmit a Pager Alarm Code number
(
Table 15
) which corresponds to a specific alarm condition.
11:00 AM 21 - APR - 01
MODEM SETUP
ACCEPT
PAGER #1
CHANGE
CHOICE
PHONE NUMBER:
CANCEL
555-5555
CHOICES: ENABLED, DISABLED
11:00 AM 21 - APR - 01
MODEM SETUP
ACCEPT
REPORTING ORDER:
CHANGE
CHOICE
PAGER THAN MODEM
CANCEL
CHOICES: MODEM AND / OR PAGER
Goodnal STP ST041 Pre Treatment (Sigma 900 MAX All Weather Refrigerated Sampler) Vendor Manual
Q-Pulse Id VM373
Active 29/10/2013
Page 94 of 122
