46
SECTION 4,
continued
2. Press
ENTER
to store the measurement reading in that
location number. To store the data in another location, use the
arrow keys to scroll to that location number or enter a
location using the number keys. Press
ENTER
.
3. If all memory locations are full, the meter will prompt to
overwrite one of the data points by displaying
Erase Sample
##?
Press
ENTER
to replace the data in that location with the
current data. Press
EXIT
to return to the previous screen
without replacing the data.
4. The meter will store the reading and return to Reading mode.
4.2
Recalling Stored Data
1. To recall stored data, press the
RECALL
key while in the
Reading mode. The screen will display the most recently
saved measurement data.
2. Use the arrow keys to scroll to the desired storage location, or
press
RECALL
again to allow number entry of a storage
location. The question mark will flash. Enter the number of
the desired storage location. Press
ENTER
to accept the
storage location or
EXIT
to escape.
3. Press the
CONC %
key to switch between the stored
concentration in mg/L and % saturation.
4. Press the
ENTER
key to view the salinity.
5. Press the
ENTER
key to view barometric pressure.
6. Press the
ENTER
key to view the altitude.
7. Press the
TIME
key twice to view the time and date of the
stored value.
8. When recalling is complete, press
EXIT
to return to the
Reading mode.
