45
SECTION 4
STORING AND RECALLING DATA
4.1
Storing Measurements
The sens
ion
™8 meter can store up to 99 measurement readings.
Data must be stored to recall it for later review, downloading, or
printing. Although the meter display will only show the
temperature, data location, and dissolved oxygen value, the
following information is stored (and can be downloaded or
printed) for each sample:
•
An asterisk (*) indicates an unstable value was stored.
•
Storage location
•
Sample concentration in mg/L
•
Sample concentration in % saturation
•
Calculated true barometric pressure
•
Temperature
•
Sample salinity
•
Date
•
Time
•
Instrument serial number
•
Software version
The new data is saved in the next available memory location,
numbered from 1 to 99. If no memory locations higher than the
current one are available, the meter will “wrap around” and
choose the next available location. The user also has the option of
choosing the storage location.
To store data:
1. After the measurement reading has stabilized, press
STORE
.
The display will prompt
Store Sample #?
(# is the next
available location). The question mark will be flashing.
