28
Section 4
Commissioning
4.1 Commissioning
1.
Insert the plug on the end of the sensor cable in the related socket in the
controller.
2.
Plug into the mains plug or switch on the power supply.
3.
When the controller is switched on for the first time, a menu for selecting the
language opens automatically. Choose one of the languages displayed. Mark
the required language using the UP and DOWN arrow keys and accept using
the ENTER key.
4.
After switch on and selection of the language, the controller automatically
scans for sensors connected. The measurement is indicated on the display.
Open the menu using the MENU key.
客服：400 688 9809
