manualshive.com logo in svg

Hach DR 6000, User Manual

Share
Download
Hach DR 6000 User Manual Download Page 98

98

Expanded programs

1.

Press 

User Programs

 in the Main Menu. 

The User Programs list will appear.

2.

Highlight the selection by pressing it or 

Select by Number

 to 

search for the program by number.

3.

Press 

Program Options

.

Use 

Add to Favorites

 to add the selected program to the 

Favorites list.

Use 

Edit

 to edit the selected program.

Use

 Delete 

to delete the selected program

.

Note: If the stored program is deleted in User Programs, it will also 
be deleted in Favorites Programs. 

6.1.4.1

Add to Favorites

1.

Press

 Add to Favorites.

 

2.

Press 

OK

 to confirm.

The program is added to the Favorites.

6.1.4.2

Edit

1.

Press 

Edit.

2.

Press 

OK

 to confirm.

A data overview that contains the specifications of the 
programmed test is shown. More information can be found 
about the input options in 

section 6.1.2, page 88

. To call up or 

to edit entered or measured values, choose "Calibration" and 
press 

Edit

.

Summary of Contents for DR 6000





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands