manualshive.com logo in svg

Hach DR 6000, User Manual

Share
Download
Hach DR 6000 User Manual Download Page 78

78

Standard programs

3.

Press 

Web Function

 on the toolbar. 

4.

Press 

Instrument Update

.

The update will start automatically.

Note: When the instrument software has been updated, a prompt to 
restart the instrument is displayed.

5.5.5.5

Program a new test

1.

The instrument needs to be at the "Main Menu" or press 

Barcode Programs

 in the Main Menu.

2.

Insert the zero cell or sample cell (corresponding to the 
process specification) into the cell compartment.

The message "Program not available" is shown, followed by 
a data overview with the specifications of the test that is to be 
revised.

The process specification of the corresponding test contains 
the new data (Wavelength, Factors, Reading Ranges, 
Conversion Factor for chemical form etc.).

3.

Highlight the corresponding line including the specifications 
of the test that is to be programmed and press 

Edit

.

4.

To finish programming, press 

Store

 and then 

Cancel

 to 

return to the Main Menu.

5.

Press

 Start

 to begin the test with the new data.

Note: Once the instrument has an active network connection, new 
software versions are announced as they become available. An 
instrument update can then be performed.

Summary of Contents for DR 6000





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands