Hach DR 6000 User Manual Download Page 45

Page: 45 / 156

Standard programs

Press

Data Log Setup

in the "Instrument Setup" menu.

•

With the setting

Auto Store: On

the device saves all

recorded measurement data automatically.

•

With the setting

Auto Store: Off

the device saves no

measurement data. To save the currently displayed
reading, select

Options > Save icon

from the results

display; the currently displayed reading only is saved.

Specify the output format of data to be exported using

Send

Data Format

. Select

xml

csv

The

Auto Send: On

setting allows the instrument to print all

recorded measurement data automatically when a thermal
printer is connected.

Auto Send: On

must be activated in

the Printer Setup for the thermal printer to enable this feature
(refer to

section 5.2.7.1

). If a PC is connected, the recorded

measurement data is imported automatically into a table.

Press

to confirm the entry.

The instrument then returns to "Instrument Setup".

Note: When the instrument memory (data log) is full, the oldest data is
automatically deleted allowing the new data to be stored.

5.3.1.2

Recall stored data from the data log

Press

Recall Data

in the Main Menu.

Press

Data Log

A listing of the stored data is displayed.

Summary of Contents for DR 6000




























































































































































Search results

Summary of Contents for DR 6000

Reviews:

Brands by name

Popular brands

Hach DR 6000, User Manual

Search results

Summary of Contents for DR 6000

Reviews:

Brands by name

Popular brands