manualshive.com logo in svg

Hach DR 6000, User Manual

Share
Download
Hach DR 6000 User Manual Download Page 147

147

Section 11

Limited warranty

Hach Company warrants its products to the original purchaser 
against any defects that are due to faulty material or 
workmanship for a period of one year from date of shipment 
unless otherwise noted in the product manual.

In the event that a defect is discovered during the warranty 
period, Hach Company agrees that, at its option, it will repair or 
replace the defective product or refund the purchase price 
excluding original shipping and handling charges. Any product 
repaired or replaced under this warranty will be warranted only for 
the remainder of the original product warranty period.

This warranty does not apply to consumable products such as 
chemical reagents; or consumable components of a product, 
such as, but not limited to, lamps and tubing.

Contact Hach Company or your distributor to initiate warranty 
support. Products may not be returned without authorization from 
Hach Company.

Limitations

This warranty does not cover:

Damage caused by acts of God, natural disaster, labor unrest, 
acts of war (declared or undeclared), terrorism, civil strife or acts 
of any governmental jurisdiction

Damage caused by misuse, neglect, accident or improper 
application or installation

•

Damage caused by any repair or attempted repair not 
authorized by Hach Company

•

Any product not used in accordance with the instructions 
furnished by Hach Company

•

Freight charges to return merchandise to Hach Company

•

Freight charges on expedited or express shipment of 
warranted parts or product

•

Travel fees associated with on-site warranty repair

This warranty contains the sole express warranty made by Hach 
Company in connection with its products. All implied warranties, 
including without limitation, the warranties of merchantability and 
fitness for a particular purpose, are expressly disclaimed.

Some states within the United States do not allow the disclaimer 
of implied warranties and if this is true in your state the above 
limitation may not apply to you. This warranty gives you specific 
rights, and you may also have other rights that vary from state to 
state.

This warranty constitutes the final, complete, and exclusive 
statement of warranty terms and no person is authorized to make 
any other warranties or representations on behalf of Hach 
Company. 

Limitation of Remedies

The remedies of repair, replacement or refund of purchase price 
as stated above are the exclusive remedies for the breach of this 

Summary of Contents for DR 6000





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands