Hach Ultra ORBISPHERE 510, Operator'S Manual

Page: 105 / 144

Orbisphere 510/511/512 Analyzers - Communication Menu 99 of 138
Operator Manual
ORBISPHERE
7.5.3 Upload Report Files
Double click on the
Orbisphere USB upload
icon on the PC desktop (created during the
process described previously in “PC Software Installation” ) to start the upload and
convert process.
When the main screen is displayed, click on the Wizard button in the top left corner.
Step 1
Step 2
Step 3
Check that the USB connection from the
instrument to PC has been made, and
that the ActiveSync® software has been
activated and the link recognized (the
icon in the taskbar should be colored
green).
Click on Next.
Choose the directory where the files are
to be stored. If the directory path does
not exist it will be automatically created.
Click on Next.
A warning message appears to warn
that all files currently in the directory (if
any exist) will be deleted prior to upload.
Click on Yes to continue with the
process or No to abort. If Yes is
selected, a progress bar of the upload is
displayed.
Should any of the files be missing (e.g.
a calibration file will be missing if no
calibration has been performed), a
warning message is displayed, but no
action is required. Click on OK.
Once the upload is complete, the files
are converted and stored in the folder
defined in Step 2 above.
Click on Finish to terminate the process,
or on either of the other two buttons to
open the folder or view the text files.