Habasit PMR-07 General Manual Use And Maintenance Download Page 32 | Manualshive

Page: 32 / 68

Habasit PMR-07 General Manual Use And Maintenance Download Page 32

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545

Regulating Unit PMR-07

Author:

A.T. / KM

INSTALLATION

Edition: 04/2006

Page

C-8

Replaces: 10/2005

C.6

DISPOSAL

IMPORTANT

The regulating unit PMR-07 is built with different types of material. When they have reached the
end of their useful life, such materials must be disposed of at specialized centers, according to
the prescriptions of the laws in force in the country of destination.

ATTENTION

The materials and substances making up the regulating unit MUST be eliminated according to
the Laws/Regulations on disposal of individual waste in force in the country where the
regulating unit is installed.

IN ANY EVENT, NO COMPONENT OF THE REGULATING UNIT MUST BE LEFT IN THE

ENVIRONMENT.

CONTACT AN AUTHORIZED COMPANY TO CARRY OUT THIS TYPE OF OPERATION.

Regulating Unit PMR-07

«
...
30
31
32
33
34
...
»

Summary of Contents for PMR-07





































































Reviews:

No comments