manualshive.com logo in svg

Habasit PMR-07, General Manual Use And Maintenance, Page: 20 / 68

Share
Download
Habasit PMR-07 General Manual Use And Maintenance Download Page 20

Habasit Italiana S.p.A. 
Vittorio Veneto 31029 (TV) 
Tel.: ++39(0)438.9113 
Fax. ++39(0)438.200545 

Regulating Unit PMR-07 

 

Author: 

A.T. / KM 

TECHNICAL SPECIFICATIONS

 

Edition: 04/2006 

Page 

B-2

 

Replaces: 10/2005 

 

 

B.1   

PURPOSE OF THE REGULATING UNIT 

The regulating unit PMR-07 has been specifically designed to control the joining process in the 
HABASIT fabrication presses using 

Thermofix

 and 

Flexproof

 method. 

The 

Thermofix

 process includes all the flat belts and other Habasit conveyor belts with right-

angled or oblique-angled joins. 
The 

Flexproof 

process includes most of the Food and Standard conveyor belts from Habasit as 

well as the thermoplastic transmission belts. 

Further details about these processes can be obtained at: 

For the 

Thermofix

 process (see technical manual Thermofix) 

For the 

Flexproof

 process (see technical manual Flexproof) 

NOTE 

By connecting to the company’s IT net H/Net it is possible to access current valid process data. 

The regulating unit PMR-07 has been developed exclusively for the applications described 
herein. No other or inappropriate applications are permitted. 

ATTENTION 

ANY USE OF THE REGULATING UNIT OTHER THAN FOR WHICH IT WAS DESIGNED 

MAY BE IMPROPER USE AND RESULT IN NOT BEING SAFE FROM THE POINTS OF 

VIEW OF THE OPERATOR, MAINTENANCE WORKER AND OF THE REGULATING UNIT 

ITSELF. 

HABASIT SHALL NOT BE HELD LIABLE FOR THE CONSEQUENCES OF ANY BREACHES 

OF THESE RULES. 

Regulating Unit PMR-07 

 

Summary of Contents for PMR-07





































































Reviews:

No comments