Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545
Hot Press PM-306/160
Author:
A.T. / KM
TECHNICAL SPECIFICATIONS
Edition: 09/2005
Page
B-2
Replaces:
B.1
Purpose of the hot-pressing device
The hot press PM-306/160 has been specifically developed for joining of HABASIT power trans-mission
and conveyor belts and machine tapes using the Thermofix and Flexproof process.
The Thermofix process includes all the flat belts and other Habasit conveyor belts with right-angled or
oblique-angled joints (for width and thickness details see:
TECHNICAL CHARACTERISTICS OF THE
The Flexproof process includes most of the Food and Standard conveyor belts from Habasit as well as
the thermoplastic transmission belts (for width and thickness see:
Further details about these processes can be obtained at:
For the
Thermofix
process (see technical manual Thermofix).
For the
Flexproof
process (see technical manual Flexproof).
NOTE
By connecting to the company’s IT net H/Net it is possible to access current valid process data.
The hot press PM-306/160 has been developed exclusively for the applications described herein. No
other or inappropriate applications are permitted.
ATTENTION
ANY USE OF THE HOT-PRESSING DEVICE OTHER THAN FOR WHICH IT WAS DESIGNED MAY
BE IMPROPER USE AND RESULT IN NOT BEING SAFE FROM THE POINTS OF VIEW OF THE
OPERATOR, MAINTENANCE WORKER AND OF THE HOT-PRESSING DEVICE ITSELF. HABASIT
SHALL NOT BE HELD LIABLE FOR THE CONSEQUENCES OF ANY BREACHES OF THESE RULES.
IMPORTANT
All assembly, maintenance and repair work, as well as the operation of the equipment, is expected to be
carried out be qualified personnel or staff under the supervision of responsible specialists and experts.
In case of doubt or lack of detailed information, always contact the manufacturer (see
Hot-pressing device PM-306/160
