Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545
Hot Press PM-306/160
Author:
A.T. / KM
REGULATIONS AND GENERAL WARNING NOTES
Edition: 09/2005
Page
A-13
Replaces:
A.9
References and standards
A.9.1
Applicable EU Directives
EU Directive N° 98/37 of 23.07.98 known as the "Machines directive”.
EU Directive N° 60/204 known as “Low tension directive”
EU Directive N° 89/336 for the convergence of Member State law on electromagnetic compatibility.
Application of the above directives is formalized through the signing of the MANUFACTURER'S
DECLARATION OF CONFORMITY drawn up once the inspection test has been carried out at the
place of installation.
This hot-pressing device has been constructed in a country that is part of the European Community and
therefore meets the safety requirements of EU directive 98/37/CE, in force from July 23, 1998.
This conformity is certified and the hot-pressing device bears the CE mark of compliance (see figure).
A.9.2
EU Directives concerning safety in the workplace
EU Directive N° 89/391 concerning the improvement of the safety and health of workers during work, in
addition to the following particular directives EU N° 89/654 and N° 89/655.
EU Directives N° 77/576 and N° 79/640 concerning safety signs in the workplace.
A.9.3
EU Directives concerning personal protection
EU Directive N° 89/656 and N° 89/686 concerning the use of personal protection devices.
A.9.4
EU Directives concerning environmental protection
EU Directives N° 75/442 on the disposal of waste.
EU Directives N° 78/319 on the disposal of toxical and harmful waste.
Hot-pressing device PM-306/160
